3 posts / 0 new
Last post
sbarmen
sbarmen's picture
HW Upgrade from OVMS 2 to OVMS 3

Hello all, I have the opportunity to buy a v2 kit at a reasonable price, what is the parts needed to upgrade to v3? I am reasonably good with electronics so I can do soldering etc, but since I have never worked with OVMS before I am searching for some advice. 

The use-case is for a Nissan Leaf gen1, so I want to minimize my cost investment for now. The car will probably not live for "that" long. :P 

markwj
markwj's picture
The v2 and v3 hardware is

The v2 and v3 hardware is completely different. Apart from the vehicle cables and antennas, I doubt they share even one single component.

You can see v2 hardware schematics here:

  • https://github.com/openvehicles/Open-Vehicle-Monitoring-System/blob/260a842953d2f031aa64cfef13484893c42daf9e/vehicle/Car%20Module/v2-base/20120814-boarddesign.pdf
  • https://github.com/openvehicles/Open-Vehicle-Monitoring-System/tree/master/vehicle/Car%20Module/v2-base

And v3 here: 

  • https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/blob/c6c2a6593f03a9a59341c092a808c8f6380de579/vehicle/hardware/v3.3/Mainboard_SCH_v3.3_20211213.pdf
  • https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/tree/c6c2a6593f03a9a59341c092a808c8f6380de579/vehicle/hardware
sbarmen
sbarmen's picture
Ok thanks. So then I will

Ok thanks. So then I will look for a v3 :)

Log in or register to post comments